Originally posted by u/shadowhunter55 at 2024-12-08T22:42:45Z

Reddit permalink

*DISCLAIMER: 07/02 FFL SOT *

Introducing the mostly printed P90BLK (P90 blackout) chambered in 300 blackout powered by an upside down BRN-180 firing mechanism. The barrel assembly bolt and guide rods were stripped from a gen 2 BRN-180 upper and flipped upside down to load rounds in from the top and eject out the left side. The trigger assembly is a standard AR fcg albeit rotated slightly to get the upside down bolt to work.

FN Herstal themselves sold licensing to an airsoft company to replicate the p90 in airsoft using the actual dimensions, I bought one to rip the cad from for the starting point of this project a couple months ago.

The integral suppressor system I had already developed for the original BRN-180 upper adapting it to the existing handguard. Basically there is a port hole in the side of the barrel that dumps pressure into a metal chamber behind the muzzle that then feeds that pressure into the can ahead of it. The metal chamber is made using a piece of the same fence post used for 37mm launchers and is retained inside the receiver.

The magazine was the trickiest part of this project by far getting the transition mechanism to cooperate properly and do what I wanted it to do. For those who don’t know the p90 magazine stores the rounds laterally down the body of the magazine and then rotates the bullet to point down the barrel as the round comes up to the feed lips. An absolutely genius design that I was able to replicate for the 300blk. It’s not perfect but it functions and today (thanks to A LOT of lube) it ran like a sewing machine.

I will be offering parts kits for the hardware needed once the files are dropped. It’s really not much a few bolts springs and pins but a few of the parts you have to buy 10 of when you only need one.

I will be posting the files to my odysee 1/1/25 as a late Christmas present to you all, suppressor files included.

Live fire video: https://imgur.com/a/CNvLBen