I would use two different disks, the one that you have already for windows and a second one for Linux. When you’re ready to install Linux Unplug the windows disk, so that you can’t screw it up ( been there, did that 😭) then when you need to use either the Linux or Windows Just choose the start up disk in bios at booting, usually F11, a tiny bit longer than dual booting, but it will save you a lot of hassle. Dual booting is rather dangerous as windows has the annoying habit of wiping Linux grub setups when updating, and Linux has the annoying habit of wiping everything, two different disks, much easier.

Timeshift for the system, works perfectly, if you screw up the system, bad update for instance just start it, and you’ll be back up running in less than ten minutes. Simple Cron backups for data, documents etc, just in case you delete a folder, document, image etc . Both of these options to a second internal HD

Okay, at least that gives me an idea, thanks

Thanks will check that out 👍

I’m going to do the same later this year as like you my setup is 10 years plus, though I’ll re-install Arch again What MB, GPU card etc did you buy? , as I’m out of touch with the latest equipment now, so would be grateful for a heads up

How about Cron? If it’s just for copying your files / data, super easy to set up and extremely rapid, it doesn’t do snapshots, it’s just a simple ‘copy my file to another place’, but it works 👍

Use timeshift, install it, just chose where you want the backups to be installed, preferably a second HD or SD Flash. Chose when like once a day, week at start up for instance and forget it. Then if you screw up your Linux, just start in console mode, timeshift --restore and five mins later your up and running.

If you want just your data to be copied, then Cron

Both are standard Linux programs, often already installed depending on what Linux you have

Though to late to help you, when you get it working again, install Timeshift, so that instead of faffing around to try and suss out what went wrong, you just start timeshift – restore from the console and a couple of minutes later you’ll have your working setup back. It’s saved my bacon quite a few times in the last couple of years, especially when you can’t login to your DE.

Until a couple of days yi would have said Liftoff but I must admit Boost seems slightly better, the pro version, the free version with ads is awful, but at only 3.50 euros that’s not expensive and worth the money

I’ve gone from the beta that I’ve been using since it came out, now to the beta QPR1 Beta 2

Haven’t even seen the stable version. Probably should have opted out somewhere 🤣

I’m running a Debian Bookworm on a Zotac Tiny PC, plus Docker and Mosquitto with HomeAssitant supervisor installed and a Sonoff usb dongle P. No ZigBee2MQTT. To begin with the Dongle was recognised by HA, natively running ZHA, all worked okay. Then I added ZigBee2MQTT as a add-on in HA, linked it to my Mosquitto account, added MQTT as an add-on as you need it as well. The difference is enormous, as I now have a ZigBee Dashboard, many more options were seen by the ZigBee2MQTT on the devices that I had installed that weren’t seen by the ZHA, I was even able to update certain firmware on my switches.

Exactly the same for me, 26Hb, no Swap installed, never had a freeze or a problem in the two years using Arch

Grab a second SSD or HD, that way, keep windows in one as it will be probably be supplied with the computer. Add Linux to the other disk, Debian maybe, EndeavourOs much better. ThNo dual boot. And when starting to computer just choose which disk you want to use (F8 or F12 often) and later if and when ready, you wipe the windows HD and use it for backups

Crossfit, mixture of weights, cardio, gym etc. For me by far the best sport as it combines everything, there’s a lot of weight movements in it though mostly bars, squats, bench press, snatches, deadlifts etc and you certainly won’t get bored

I’ve stopped using lineage as i changed the pixel3 for a 6a, so stock android. Although at the time I could get PayPal to work my banking app was a no no

Try Lineage. I ran it on my Pixel 3 for about two years when Google stopped updating it. Then when I decided to sell it, just reflashed the Google OS back on it

Like you i switched from about 30 years of windows to Linux almost three years ago, Ubuntu, Mint, Manjaro, Endeavour before ending up with Arch which I find perfect. I also have two PCs running Debian for HomeAssitant setups in two homes but I don’t like Debian I sometimes use my wife’s Windows setup for Garmin Express as that’s the only windows program that I need. So keep on going, Windows is not missed,

I’ve used Joplin for years now before was Evernote. I like it because it’s open source and the syncing option is built in, exemple either to Dropbox or NextCloud (I use both these options, DB only because I have a free option of 12gB otherwise I would use just NC) The syncing is painless as as I said built-in. It’s not a pretty app, fairly plain, but it works perfectly, on my android and Linix PCs, Arch and Debian. I did try Obsidian once. It’s pretty, but not being open source put me of. Try it again, takes minutes to set up, as again open source and works well

Thanks, I thought so, but preferred to ask. Thrn yes much better than a Pi and if yours is like mine then not much bigger

First dopey question, what is a NUC? It’s probably a computer but? If so same’ish story here went from a Pi4 to a Lenovo Tiny PC (reconditioned from Amazon at 100 euros) then sold the raspberry for 65 euros 🤣 Far faster and better, installed Debian Bookworm, Docker and then did a new Mosquitto and HA supervisor installation. Far better 👍