I just thought the same thing- what if the sea randomly turns off downloads forever. Did we just lose years of work?

Wanted to ask you - why the printed threads on your stuff is always not 1/2x28? Is that something that impacts the performance?

Also, do you think printing a thread adapter from 1/2x28 to the correct thread for your stuff is a viable option or it should be a non-printed metal adapter?

Well… I guess you are right.

Any advice on good folding brace/stock for chortex?

Thank you for your answer! Do I understand correctly that the barrel does not touch the chassis at any point (so the ribs are for structural rigidity) and the receiver is held my a single bolt in front of the magwell? The printed the shortest version and thought that may be was the culprit.

Printed it already, can’t figure out if I am doing something wrong, but the rest of the gun kinda wiggles up and down. I thought the barrel would rest on the end of the receiver, but it’s actually much thinner than the spaces there.

Also, can you recommend a good grip? What are you running?

Thank you!

I appreciate your answer! I am honestly just doing it for fun/engineering side, I have other reliable glocks etc for the defense.

I am thinking of actually going this way! Do you know if there are kits that are like the real thing (wood, the stock etc)? So i can buy the kit, the barrel, and print the rest?

I really appreciate your thorough answer! (also respect the grind)