Yeah, 8(PCIe 3.0 x1)

It’s listed in the specifications section near the bottom of the page titled “M.2 2280 NVMe Slot”.

There’s also 4get that is similar to SearXNG. https://4get.ca/

I have not tried it much personally though.

git repo: https://git.lolcat.ca/lolcat/4get

There’s also archive.today that can bypass these paywalls. https://archive.ph/NfjJm

Aw, that’s a shame. I do want to point out that if you have PayPal, at least in the U.S. you can get a debit card that links the balance and other cards connected to the PayPal account.

Look at either putting it behind a reverse proxy or using the built in Let’s Encrypt / ACME configuration.

Suggested documentation:

• https://headscale.net/0.26.1/ref/integration/reverse-proxy/
• https://headscale.net/0.26.1/ref/tls/

The config linked to in their documentation states

# Address to listen to / bind to on the server
#
# For production:
# listen_addr: 0.0.0.0:8080
listen_addr: 127.0.0.1:8080

# Address to listen to /metrics and /debug, you may want
# to keep this endpoint private to your internal network
metrics_listen_addr: 127.0.0.1:9090

Port 8080 TCP is used for the connection, 9090 TCP is for metrics and not suggested to port forward. If you use a reverse proxy, you do not need to port forward to either of those ports directly, and instead to the reverse proxy.

The last thing I can suggest are the last two comments on the steam-devices repo: https://github.com/ValveSoftware/steam-devices/issues/64#issuecomment-3092449971

Try adding these to a file such as /etc/udev/rules.d/71-8bitdo-pro-2.rules

# 8bitdo pro 2 bluetooth hidraw
ACTION!="remove", KERNEL=="hidraw*", KERNELS=="*2DC8:6006*", MODE="0660", TAG+="uaccess"

and/or

ACTION!="remove", KERNEL=="hidraw*", KERNELS=="*2DC8:6012*", MODE="0660", TAG+="uaccess"

The reason I added ACTION!="remove" is due to a recent change with systemd.

ACLs for device nodes requested by “uaccess” udev tag are now always applied/updated by systemd-udevd through “uaccess” udev builtin, and systemd-logind no longer applies/updates ACLs but triggers “change” uevents to make systemd-udevd apply/update ACLs. Hence, the “uaccess” udev tag should be set not only on “add” action but also on “change” action, and it is highly recommended that the rule is applied all actions except for “remove” action.

Recommended example:

ACTION!=“remove”, SUBSYSTEM==“hidraw”, TAG+=“uaccess”

The following example does not work since v258:

ACTION==“add”, SUBSYSTEM==“hidraw”, TAG+=“uaccess”

Check out this repo for udev rules: https://codeberg.org/fabiscafe/game-devices-udev

Instructions copied from repo:

1. Download the archive.
2. Extract the archive.
3. Copy all the rule files to /etc/udev/rules.d.
4. Create another file: /etc/modules-load.d/uinput.conf.
5. Put uinput into that file.
6. Reboot.

Thank you. I’ll be sure to try it later.

8BitDo Ultimate 2 Wireless Controller.

It uses the xbox layout. It has hall effect triggers and TMR joysticks (similar to hall effect), 2 back paddle buttons, 2 extra bumper buttons, and gyro.

The software does not work, or at least didn’t work on Linux with wine when I tried a few months ago. However for just regular controls and if using Steam Input it doesn’t matter.

https://www.8bitdo.com/ultimate-2-wireless-controller/

https://www.gamingonlinux.com/2025/04/8bitdo-ultimate-2-is-getting-full-steam-input-support-for-more-buttons/

Bookmarks for linking to services. Grafana for graphs that I only look at if I am curious or looking into when a problem arises. I could use Uptime Kuma if I wanted a simpler solution or notifications.

Try contacting the Forgejo admin, they can enable the HTTP meta refresh challenge, though it does have a higher false positive rate. https://anubis.techaro.lol/docs/admin/configuration/challenges/metarefresh

Your Lemmy instance blocks the lemmygrad instance where IHave69XiBucks resides. My instance does too.

You can look at the /boot/grub/grub.cfg file for details as to what each option is on the grub menu. It’s not the prettiest file though. Search for menuentry, that should be followed by the name of the entry and below details for what kernel and options it uses.

deleted by creator

There’s an option labeled Use AI to suggest tabs and a name for tab groups.

On 141 it’s listed in Settings under the General => Tabs section.

It changes browser.tabs.groups.smart.userEnabled.

Looking at it further, either option will disable it. Here’s the code that checks both values, https://github.com/mozilla-firefox/firefox/blob/FIREFOX-ANDROID_141_0_3_RELEASE/browser/components/tabbrowser/content/tabgroup-menu.js#L481

The ?ref tag is from the Ghost blogging platform. https://forum.ghost.org/t/remove-ref-from-links-in-posts/37701/2

This is called “Outbound link tagging” - you can configure this on the Analytics Settings page (/ghost/#/settings/analytics)

And yeah, they do the same as GamingOnLinux with not including the content in the RSS feeds.

Forgot to give my opinion. The ref tag doesn’t bother me because it’s not giving any private information up, besides where I am from just like the referrer header does. I am kind of conflicted with the RSS feeds because I personally use them for many things, however I understand that these places need to advertise to make money (though I block ads too).

So I am not entirely sure. I did find the code for it however if you want to take a look.

In Firefox it uses the variable for the neqo library, which is the the Mozilla Firefox implementation of QUIC in Rust.

Line #284: https://github.com/mozilla-firefox/firefox/blob/57e6d88cb3ad7f9777145f2d4fba11d4fc9de369/netwerk/socket/neqo_glue/src/lib.rs#L284

code:

let mut params = ConnectionParameters::default()
    .versions(quic_version, version_list)
    .cc_algorithm(cc_algorithm)
    .max_data(max_data)
    .max_stream_data(StreamType::BiDi, false, max_stream_data)
    .grease(static_prefs::pref!("security.tls.grease_http3_enable"))
    .sni_slicing(static_prefs::pref!("network.http.http3.sni-slicing"))
    .idle_timeout(Duration::from_secs(idle_timeout.into()))
    // Disabled on OpenBSD. See <https://bugzilla.mozilla.org/show_bug.cgi?id=1952304>.
    .pmtud_iface_mtu(cfg!(not(target_os = "openbsd")))
    // MLKEM support is configured further below. By default, disable it.
    .mlkem(false);

In the neqo library it’s used here: https://github.com/mozilla/neqo/blob/9e52e922343609dba5171c0adb869cff7bd8d3a0/neqo-transport/src/crypto.rs#L1594

code:

let written = if sni_slicing && offset == 0 {
    if let Some(sni) = find_sni(data) {
        // Cut the crypto data in two at the midpoint of the SNI and swap the chunks.
        let mid = sni.start + (sni.end - sni.start) / 2;
        let (left, right) = data.split_at(mid);

        // Truncate the chunks so we can fit them into roughly evenly-filled packets.
        let packets_needed = data.len().div_ceil(builder.limit());
        let limit = data.len() / packets_needed;
        let ((left_offset, left), (right_offset, right)) =
            limit_chunks((offset, left), (offset + mid as u64, right), limit);
        (
            write_chunk(right_offset, right, builder),
            write_chunk(left_offset, left, builder),
        )
    } else {
        // No SNI found, write the entire data.
        (write_chunk(offset, data, builder), None)
    }
} else {
    // SNI slicing disabled or data not at offset 0, write the entire data.
    (write_chunk(offset, data, builder), None)
};

I am looking forward to the new homestead. Also the new elite specs look interesting, can’t wait until we hear more.

I’m not sure if you know, you can craft and use two Conflux. The new Skimmer masteries have me interested as well!

It’s probably this bug: https://bugzilla.mozilla.org/show_bug.cgi?id=1955112

It’s a bug specifically on Wayland.

Try grabbing the tab and moving it and letting go, you don’t have to move it’s tab slot.