This pro life tip brought to you by The Irritation of Removing Uncomfortable Tags.

Use a seamripper to remove the stitches that attach a tag and the garment itself. See attached picture for a demonstration of this. Seamrippers are cheap (~1 USD is typical) and available at any store with even a token sewing section, such as walmart or target, and some grocery stores as well. Using a seamripper lets you remove the tag entirely, while cutting the tag off usually leaves behind a sliver of the tag fabric that can be uncomfortable.

  • RobotToaster@mander.xyz
    link
    fedilink
    arrow-up
    26
    ·
    29 days ago

    Just make sure the label isn’t attached by the overlock seam that holds the garment together, I’ve seen a few things with tags attached like that.

    • pedantichedgehog@sh.itjust.worksOP
      link
      fedilink
      arrow-up
      6
      ·
      29 days ago

      Depending on the fabric, placement of the seam, discomfort caused by the tag, and whether you have access to a sewing machine, whether or not it’s worth undoing the overlock seam to remove a tag and then mending the new hole varies. Personally I’ve left these and removed them on different garments.

  • rumschlumpel@feddit.org
    link
    fedilink
    arrow-up
    10
    ·
    29 days ago

    TIL that exists.

    I’ve been thinking about getting more serious about those annoying tags (TBH I’m only sometimes bothered by tags, but the size of the tags is getting ridiculous lately). Is a seamripper really that much better than undoing the seams with nail scissors?

    • CallMeAl (like Alan)@piefed.zip
      link
      fedilink
      English
      arrow-up
      9
      ·
      29 days ago

      Is a seamripper really that much better than undoing the seams with nail scissors?

      Yes! Its designed for the job and you can do it very quickly once you’ve used it a few times.

    • faythofdragons@slrpnk.net
      link
      fedilink
      English
      arrow-up
      7
      ·
      29 days ago

      I buy them in bulk, because I sew, and treat them like a handyman treats a flathead screwdriver. They’re a little less likely to accidentally cut your shirt, and it’s easier to get into tight stitches, but that’s about it.

    • Akagigahara@lemmy.world
      link
      fedilink
      English
      arrow-up
      6
      ·
      29 days ago

      Probably far quicker and less likely do damage something else. Seamrippers work by having a small blade in the middle of the U-shape. And due to the pointy bit at the bottom, you might be able to more easily scoop up the thread if it’s tighter

    • pedantichedgehog@sh.itjust.worksOP
      link
      fedilink
      arrow-up
      3
      ·
      29 days ago

      I’ve never used nail scissors, don’t know. Before I realized I could use a seamripper I cut the tag itself as close to the seam as possible with ordinary craft/paper scissors.

  • ace_garp@lemmy.world
    link
    fedilink
    arrow-up
    6
    ·
    29 days ago

    Excellent for sanitising branded promotional items, like jackets or bags.

    Less than 5 minutes to remove the advertising.

    It’s also known as a quick-unpick.

  • hungryphrog
    link
    fedilink
    English
    arrow-up
    1
    ·
    28 days ago

    I don’t have or buy any clothes with tags nowadays, but that’s a good idea, the slivers have always been annoying.